Small Wind Turbine Site Assessment in Europe: A Practical Checklist

Quick answer: small wind succeeds only at genuinely windy, low-turbulence sites with sufficient hub height. A rooftop or garden location that looks windy can perform poorly because buildings and trees create turbulence. Measure or model wind at the proposed hub height before purchasing equipment.
Start with the wind resource
Use a credible wind map for screening, then obtain site-specific data. Annual average speed alone is insufficient because energy depends strongly on the wind-speed distribution and the turbine power curve. Whenever possible, measure at or near hub height for at least a representative period and correlate it with a long-term reference.
Obstacles and turbulence
Buildings, hedges and trees create wakes that extend far downwind. Turbulence reduces energy and increases fatigue loading. Place the rotor well above nearby obstacles and outside dominant wakes. Urban rooftops often have complex flow that invalidates simple estimates.
Energy-yield workflow
- Obtain hub-height wind-speed distribution.
- Apply air-density correction for elevation and temperature.
- Use the certified turbine power curve.
- Subtract electrical, availability, icing and curtailment losses.
- Model obstacle and turbulence effects.
- Compare annual energy with the load and export arrangement.
Planning and grid checks
European requirements vary by country and municipality. Check planning permission, height limits, heritage and aviation constraints, noise and shadow rules, structural certification, grid connection and metering before purchase. Use an accredited installer where required.
Mechanical and electrical design
Confirm foundation or roof capacity for static and cyclic loads. Provide safe isolation, overcurrent protection, earthing, lightning and surge protection, and a controlled shutdown method. Cable voltage drop can be significant on remote towers, so compare AC and DC architecture carefully.
Financial reality
Calculate energy from the measured resource, not the turbine’s rated power. Include tower, foundation, crane access, permissions, inverter, maintenance, insurance and eventual decommissioning. Solar PV may be more economical on sheltered sites, while wind can complement solar at exposed rural and coastal sites.
FAQ
Is a rooftop turbine a good idea? Often not: turbulence, vibration and structural transmission can outweigh the apparent convenience.
How high should the tower be? High enough to clear nearby obstacles and reach cleaner flow, subject to engineering and planning limits; there is no universal height.
See our Wind Energy and Solar Energy sections.
Check the latest national and local planning, grid and safety requirements before construction.
Featured photo: Barbara Horn via Unsplash.



